GM_PathProfileLOSParams_t Class |
Namespace: GlobalMapper
public class GM_PathProfileLOSParams_t
The GM_PathProfileLOSParams_t type exposes the following members.
Name | Description | |
---|---|---|
GM_PathProfileLOSParams_t |
Default Constructor
|
Name | Description | |
---|---|---|
mDetailsStr | OUT: String containing path details (set to NULL if you don't care) | |
mElevList | OUT: List of Elevations (set to NULL if you don't care). | |
mLOSFirstBlockedPos | OUT: Location of first blocked location along path (only valid if mLOSMinClearance is negative) | |
mLOSLastBlockedPos | OUT: Location of last blocked location along path (only valid if mLOSMinClearance is negative) | |
mLOSMinClearance | OUT: Minimum line-of-sight clearance in meters (will be negative if the line of sight is not clear) | |
mLOSMinClearancePos | OUT: Location of minimum line-of-sight clearance |
Name | Description | |
---|---|---|
mAtmosphericCorr | IN: Atmospheric correction for LOS (1.3333 is standard for radio waves, 1.0 is no correction) | |
mDetailsStrMaxLen | IN: Maximum length of details string | |
mDfltElev | IN: Elev to use when none could be found | |
mEndX | IN: End X coord in current projection | |
mEndY | IN: End Y coord in current projection | |
mFlags | IN: Flags controlling behavior | |
mFresnelFreq | IN: Frequency (in GHz) to use for testing clearance of first Fresnel zone (use 0.0 to not do Fresnel testing) | |
mFresnelPctClear | IN: Percentage of first Fresnel zone that must be clear of obstacles (use 0.6 for 60%). If 0 is specified, the default of 60% is used. | |
mListSize | IN: Number of elevations to retrieve | |
mLOSFromHeight | IN: Line-of-sight from height in meters | |
mLOSToHeight | IN: Line-of-sight to height in meters | |
mStartX | IN: Start X coord in current projection | |
mStartY | IN: Start Y coord in current projection |